C110 Mechanical Joint Fittings

MATERIAL: Ductile Iron ASTM A536, Grade 65-45-12, 60-42-10 or 70-50-05.

PRESSURE: 350PSI WATER WORKING PRESSURE (CLASS 350) 2” - 24” and 250PSI WATER WORKING PRESSURE (CLASS 250) 30” - 48”.

TESTING: In accordance with ANSI / AWWA C110/A21.10 & UL - FM requirements.

LAYING LENGTH: In accordance with ANSI / AWWA C110/A21.10

DEFLECTION: 2”- 4”=8°, 6”=7°, 8”-12”=5°, 14”-16”=3 1⁄2°, 18”-24”=3°, 30”-48”=2°

CEMENT LINING: In accordance with ANSI / AWWA C104 / A21.4.

COATING: Interior of fitting is seal coated (asphaltic material) in accordance with ANSI / AWWA C104 / A21.4 and NSF61 approved.

COATING: Exterior of fitting is seal coated (asphaltic material) in accordance with ANSI / AWWA C110/A21.10 and NSF approved.

GASKETS: SBR in accordance with ANSI / AWWA C111 / A21.11. Also available in EDPM, NBR and CR.

T-BOLTS: Low Alloy corrosion resistant high strength steel in accordance with ANSI / AWWA C111 / A21.11.

APPROVALS: 3”-16” Underwriters Laboratories listed and Factory Mutual Approved.

STANDARDS: Certified to NSF61 Standard ANSI / AWWA C110/A21.10 for Full Body Ductile Iron Fittings 2”-48”